OUR RESI-CRETE FOR YOUR STRUCTURAL ART!

resi-CRETE: Structure and Texture for Your Artwork resi-CRETE is a fascinating medium that allows you to create stunning textures and dimensional effects in your artwork. It is easy, safe, and quick to use, and can also be mixed with other products to achieve truly unique results. resi-CRETE is a pre-pigmented, cement-like powder that can be mixed with either acrylic emulsion or resin. It enables you to give your artwork both structural depth and tactile appeal. Create concrete-like surfaces or relief-style textures with cracks and grooves. The final look depends on how you apply resi-CRETE and which additional materials you incorporate.   Applications of resi-CRETE resi-CRETE is one of the lightweight materials you can use to create textured and tactile artwork. It offers excellent coverage and adheres quickly to a wide variety of surfaces, including wood, glass, steel, metal, stone, ceramic, and many more.   Key Features of resi-CRETE Thanks to its pre-pigmented formulation, resi-CRETE is one of the easiest media for creating textured surfaces. It can also be tinted with additional colors, offers various application techniques, and is perfectly suited for working with resin.   How to Use resi-CRETE For a Concrete-Like Surface Step 1: Pour the resi-CRETE powder into a suitable mixing cup. Step 2: Add a small amount of acrylic emulsion using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: Your mixture should reach a paste-like consistency. While stirring continuously, gradually add more acrylic emulsion until you achieve a smooth, lump-free mixture. Step 4: The correct consistency is reached when the resi-CRETE and acrylic emulsion mixture no longer flows. Step 5: The less acrylic emulsion you add, the firmer the texture paste becomes. This allows you to apply and shape it in three dimensions. Step 6: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 7: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   For a Relief-Style Surface Step 1: Pour the resi-CRETE powder into a suitable mixing cup. Step 2: Add a small amount of acrylic emulsion using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: Your mixture should reach a very firm consistency. Ensure that the mixture is smooth and free of lumps. Step 4: The correct consistency is reached when the resi-CRETE and acrylic emulsion mixture no longer flows and has become firm. Step 5: Apply the mixture generously to your substrate and briefly warm it with a heat gun or hair dryer, or allow your artwork to dry in direct sunlight. These methods will enhance crack formation. Step 6: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 7: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   For a Resin-Based Sculpting Paste Step 1: Mix the resin and hardener of MASTERCAST 1-2-1 at a 1:1 ratio by volume. Pour both components into a suitable mixing cup. (TOTALCAST and ULTRACAST XT are also suitable.) Step 2: Add resi-CRETE and stir the measured amount into the mixture using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: The recommended mixing ratio is 40 g of resi-CRETE per 100 ml of resin. Step 4: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 5: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   Important Safety Information Always wear nitrile gloves. It is recommended to work in a well-ventilated area and wear a suitable respirator. Avoid skin contact (if resin comes into contact with your skin, wash immediately with plenty of soap and water). Do NOT eat, drink, or smoke while working. If the product gets into your eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention.

OUR RESI-CRETE FOR STRUCTURE AND HAPTIC That's it. resi-CRETE is a fascinating medium with which you can create fascinating structures on your artwork. It's easy, safe and quick to use, and you can also mix resi-CRETE with other products to achieve unique results. It can. resi-CRETE is a pre-pigmented, cement-like powder that can be mixed with both acrylic emulsion and resin. With the help of resi-CRETE you can create a structural and haptic experience for your pictures. Create surfaces with resi-CRETE that are reminiscent of concrete or relief-like structures with cracks or furrows. The look depends on how you apply resi-CRETE and what materials you add to it. That's what it's for. resi-CRETE is one of the lightweight materials you can use for art with texture and feel. The resi-CRETE provides excellent and quick coverage on surfaces such as wood, glass, steel, metal, stone, ceramics and much more. Particularities. Due to its pre-pigmentation, resi-CRETE is one of the easiest media to create structures. It can also be colored, there are different ways of using it and it is wonderfully suited for working with Resin. Measuring, mixing and processing resi-CRETE For a concrete-like surface 1.) Put the resi-CRETE powder in a suitable mixing cup. 2.) Add a small amount of acrylic emulsion. Use a plastic spatula for this. Stir slowly and carefully; for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mixture must reach a pasty consistency. To do this, you can continue to add acrylic emulsion while stirring constantly. Make sure you get a smooth mixture with no lumps. 4.) The right consistency has been reached when the mixture of resi-CRETE and acrylic emulsion no longer flows. 5.) The less acrylic emulsion you add, the firmer your structure paste will be. It can be applied and designed three-dimensionally. 6.) Your mixture is ready and you now have 25-30 minutes to process the resi-CRETE. Then the hardening process begins. 7.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now apply the mixture to your painting Surface. For a relief-like surface 1.) Put the resi-CRETE powder in a suitable mixing cup. 2.) Add a small amount of acrylic emulsion. Use a plastic spatula for this. Stir slowly and carefully; for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) Your mixture must reach a very firm consistency. Make sure you get a firm mixture with no lumps. 4.) The right consistency is reached when the mixture of resi-CRETE and acrylic emulsion stops flowing and has reached a solid state. 5.) Apply the mass a little thicker to your surface and briefly heat it up with a hair dryer or let your work of art dry in the sun. These processes increase cracking. 6.) Your mixture is ready and you now have 25-30 minutes to process the resi-CRETE. Then the hardening process begins. 7.) You have prepared your painting surface beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now apply the mixture to your painting Surface. For putty based on resin 1.) Resin and hardener of MASTERCAST 1-2-1 are mixed by volume 1:1. Place the two components in a suitable mixing cup. (TOTALCAST and ULTRACAST XT are also suitable.) 2.) Add resi-CRETE and stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and carefully; for 3-5 minutes; also on the bottom and edges of the mixing cup. 3.) The mixing ratio should be 40 grams of resi-CRETE to 100 ml of resin. 4.) Your mixture is ready and you now have 25-30 minutes to process the resi-CRETE. Then the hardening process begins. 5.) You have prepared your painting surface beforehand, which means: it is dusted, degreased and lying flat on your work surface. Now apply the mixture to your painting Surface. You should pay attention to this when working with Resin. • Always wear nitrile gloves. • It is advisable to work in a well-ventilated area and to wear a respirator. • Avoid skin contact (if resin gets on skin, wash with plenty of soap and water). • DO NOT eat, drink or smoke while working. • If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately.

resi-CRETE: Structure and Texture for Your Artwork resi-CRETE is a fascinating medium that allows you to create stunning textures and dimensional effects in your artwork. It is easy, safe, and quick to use, and can also be mixed with other products to achieve truly unique results. resi-CRETE is a pre-pigmented, cement-like powder that can be mixed with either acrylic emulsion or resin. It enables you to give your artwork both structural depth and tactile appeal. Create concrete-like surfaces or relief-style textures with cracks and grooves. The final look depends on how you apply resi-CRETE and which additional materials you incorporate.   Applications of resi-CRETE resi-CRETE is one of the lightweight materials you can use to create textured and tactile artwork. It offers excellent coverage and adheres quickly to a wide variety of surfaces, including wood, glass, steel, metal, stone, ceramic, and many more.   Key Features of resi-CRETE Thanks to its pre-pigmented formulation, resi-CRETE is one of the easiest media for creating textured surfaces. It can also be tinted with additional colors, offers various application techniques, and is perfectly suited for working with resin.   How to Use resi-CRETE For a Concrete-Like Surface Step 1: Pour the resi-CRETE powder into a suitable mixing cup. Step 2: Add a small amount of acrylic emulsion using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: Your mixture should reach a paste-like consistency. While stirring continuously, gradually add more acrylic emulsion until you achieve a smooth, lump-free mixture. Step 4: The correct consistency is reached when the resi-CRETE and acrylic emulsion mixture no longer flows. Step 5: The less acrylic emulsion you add, the firmer the texture paste becomes. This allows you to apply and shape it in three dimensions. Step 6: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 7: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   For a Relief-Style Surface Step 1: Pour the resi-CRETE powder into a suitable mixing cup. Step 2: Add a small amount of acrylic emulsion using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: Your mixture should reach a very firm consistency. Ensure that the mixture is smooth and free of lumps. Step 4: The correct consistency is reached when the resi-CRETE and acrylic emulsion mixture no longer flows and has become firm. Step 5: Apply the mixture generously to your substrate and briefly warm it with a heat gun or hair dryer, or allow your artwork to dry in direct sunlight. These methods will enhance crack formation. Step 6: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 7: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   For a Resin-Based Sculpting Paste Step 1: Mix the resin and hardener of MASTERCAST 1-2-1 at a 1:1 ratio by volume. Pour both components into a suitable mixing cup. (TOTALCAST and ULTRACAST XT are also suitable.) Step 2: Add resi-CRETE and stir the measured amount into the mixture using a plastic spatula. Stir slowly and thoroughly for 3–5 minutes, making sure to scrape the bottom and sides of the mixing cup. Step 3: The recommended mixing ratio is 40 g of resi-CRETE per 100 ml of resin. Step 4: Your mixture is now ready. You have approximately 25–30 minutes to work with the resi-CRETE before the curing process begins. Step 5: Prepare your substrate beforehand by ensuring it is clean, dust-free, grease-free, and lying flat on your work surface. Then apply the mixture to your substrate.   Important Safety Information Always wear nitrile gloves. It is recommended to work in a well-ventilated area and wear a suitable respirator. Avoid skin contact (if resin comes into contact with your skin, wash immediately with plenty of soap and water). Do NOT eat, drink, or smoke while working. If the product gets into your eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention.